Section Menu

16 April 2019

For the proven performance you expect, NHP’s full range of ISO plugs, sockets and switches are designed and tested in Australia with IP66 protection for all your industrial and commercial needs.

The latest addition to the range is the NHP ISO Key Switch, with 2 or 3 pole contacts at 20, 32 and 50 Amp (50A 3 poles only) in Standard Grey (G) for most applications and Resistant Orange (RO) for high visual recognition and for use in circumstances where resistance to chemicals such as oils, solvents, animal fats and lubricants, is required.

For lighting and control applications, the ISO Time Switch provides battery back-up, 24-hour time range and is rated at 240V AC.

The new and improved 3 Pin Plug range is available in 10A, 15A, 20A flat pins and 10A round earth versions, featuring time saving improved cable grip and multi-purpose 20mm gland entry.

For portable and fixed plant and equipment requirements NHP’s ISO Appliance Inlets are available in 3, 4 and 5 pin, 10-50 Amp versions, with IP66 protection in Standard Grey or Resistant Orange.

NHP also has you covered with the high-performance range of ISO RCD (multi-purpose) covers and pre-punched 22.5mm hole lids. This includes 1 and 2 gang lids which are available in Standard Grey, Resistant Orange and Resistant White.

To complete your commercial or domestic applications, you can’t go past the NHP ISO range of plugs, switches and sockets, designed and tested to suit Australian and New Zealand conditions.

Get In Touch With Nhp

Please fill in the enquiry form and we will get back to you as soon as possible.

If your enquiry is of an urgent nature, please call our hotline on:

AUS - 1300 NHP NHP (1300 647 647)
NZ - 0800 NHP NHP (0800 647 647)

Thank You

Your details have been submitted. We will get back to you as soon as possible.

Check out some of our latest videos below: