Section Menu

While NHP is renowned for providing quality products and service to our customers, we also know how to put on a great event.

Be it a customer function, new product launch, a road show or training and seminars, NHP looks to provide an event that will not only get people interested in coming along, but also to keep them entertained and informed from when they arrive.

Hands-on and interactive displays, informative speakers, quality training, giveaways, competitions and much more, NHP’s events will always leave you wanting more.

Showing 1 - 30 of 30 Events Showing 1 - 0 of 30 Events No Upcoming Events

Show Past Events  

event image

Managing Industrial Networks with Cisco Networking Technologies

The goal of this course is to enable you to achieve competency and skills to install, maintain, and troubleshoot industrial network systems while helping to ensure network availability, reliability, and Internet security throughout your company.

Course Code: IMINS

Register Now
28 May 2018 - 1 June 2018 8:30am - 4:30pm
Wollongong
event image

SLC 500 and RSLogix 500 Maintenance and Troubleshooting

This skill-building course provides you with the knowledge and practice needed to interpret, isolate, and diagnose common hardware problems related to noise, power, and discrete and analogue I/O.

Course Code: CCPS43

Register Now
29 May 2018 - 1 June 2018 8:30am - 4:30pm
Sydney
event image

Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals & Troubleshooting

This course is intended for individuals who need to maintain and troubleshoot a ControlLogix system, but have no current working experience with ControlLogix systems.

Course Code: CCP299

Register Now
29 May 2018 - 1 June 2018 8:30am - 4:30pm
Gladstone
event image

EtherNet/IP Configuration and Troubleshooting

This course should prepare you to effectively:
• Configure a Stratix® switch (5700, 8000, and/or 8300) to meet a variety of network requirements
• Assign IP addresses to devices on an EtherNet/IP network using rotary switches and a variety of software
• Monitor switch performance and status
• Diagnose and resolve issues with switches and devices on a network

Course Code: CCP183

Register Now
30 May 2018 - 1 June 2018 8:30am - 4:30pm
Perth
event image

Managing Industrial Networks with Cisco Networking Technologies

The goal of this course is to enable you to achieve competency and skills to install, maintain, and troubleshoot industrial network systems while helping to ensure network availability, reliability, and Internet security throughout your company.

Course Code: IMINS

Register Now
4 June 2018 - 8 June 2018 8:30am - 4:30pm
Sydney
event image

FactoryTalk View ME and PanelView Plus Programming

This course is a skill-building course that provides you with the skills necessary to develop FactoryTalk View Machine Edition (ME) applications that run on the next-generation PanelView Plus terminals.

Course Code: CCV204

Register Now
5 June 2018 - 8 June 2018 8:30am - 4:30pm
Brisbane
event image

TUV Functional Safety Technician

In this training, students will learn how the current standards dictate the selection, assembly, installation, validation, and maintenance of safety devices and components to reduce hazards from machinery and ensure the safety of people and the environment. Practical examples will demonstrate possibilities regarding machine protection.

Course Code: SAF-TUV0T

Register Now
5 June 2018 - 6 June 2018 8:30am - 4:30pm
Mackay
event image

SLC 500 and RSLogix 500 Maintenance and Troubleshooting

This skill-building course provides you with the knowledge and practice needed to interpret, isolate, and diagnose common hardware problems related to noise, power, and discrete and analogue I/O.

Course Code: CCPS43

Register Now
5 June 2018 - 8 June 2018 8:30am - 4:30pm
Melbourne
event image

DeviceNet and RSNetWorx Configuration and Maintenance

The focus of this course is a DeviceNet network in a ControlLogix system. To meet this objective, students begin by designing a cable system, and then configure a driver, a 1756-DNB scanner module for ControlLogix, and network devices.

Course Code: CCP164

Register Now
5 June 2018 - 7 June 2018 8:30am - 4:30pm
Melbourne
event image

Level 3: RSLogix 5000 Development & Programming of ControlLogix Projects

This course presents a deeper understanding of project development tasks, including organising tasks and routines, organising controller data, configuring modules, and sharing data.

Course Code: CCP143

Register Now
5 June 2018 - 8 June 2018 8:30am - 4:30pm
Brisbane
event image

Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals & Troubleshooting

This course is intended for individuals who need to maintain and troubleshoot a ControlLogix system, but have no current working experience with ControlLogix systems.

Course Code: CCP299

Register Now
5 June 2018 - 8 June 2018 8:30am - 4:30pm
Gundagai
event image

State of Origin

&nbsp;&nbsp; <table style="width: 100%; font-family: arial, helvetica, sans-serif; font-size: 10pt;"> <tbody> <tr> <td style="text-align: left; padding-left: 30px; vertical-align: top;">&nbsp;<span style="line-height: 115%; font-size: 10pt; font-family: Arial, sans-serif;">&nbsp;</span> </td> </tr> <tr> <td><p>As a valued NHP customer, we would like to extend an exclusive invitation for you to attend the State of Origin, Game 1, at the MCG&nbsp;in Melbourne on the 6th of June 2018 as our guest.

Register Now
5 June 2018 - 7 June 2018 1:00pm - 12:30pm
NHP Richmond 43 - 67 River Street Richmond Victoria 3121
6 June 2018 9:00am - 4:00pm
NHP Electrical Engineering Products 104-106 William Angliss Drive Laverton North Victoria 3026
7 June 2018 9:00am - 4:00pm
NHP Electrical Engineering Products 40-42 Cyber Loop Dandenong South Victoria 3175
event image

Installation & Maintenance of Electrical Equipment in Hazardous Areas

This course is intended for electrical workers, technicians and engineers involved with installing and maintaining electrical equipment in hazardous areas. It covers the principles of hazardous area classification, explosion-protection techniques, equipment installation requirements, inspections, and procedures for breakdowns and maintenance, with theory and practical components.

Course Code: SATTRNC03

Register Now
12 June 2018 - 15 June 2018 8:30am - 4:30pm
Melbourne
event image

FactoryTalk View SE Maintenance and Troubleshooting

This course is intended to provide you with the skills required to diagnose common problems on a FactoryTalk View SE system. You will practice operating and troubleshooting the system through hands-on exercises using FactoryTalk View SE software.

Course Code: CCV206

Register Now
13 June 2018 - 14 June 2018 8:30am - 4:30pm
Sydney
event image

Installation & Maintenance of Electrical Equipment in Hazardous Areas - Refresher

This course is intended as a periodic refresher (recommended every two years) for electrical workers and engineers who hold the competencies delivered by our five day course. It refreshes the principles of hazardous area classification, explosion-protection techniques, equipment installation requirements, inspections, and procedures for breakdowns and maintenance, and goes over any changes to standards.

Course Code: SATTRNC02

Register Now
14 June 2018 - 15 June 2018 8:30am - 4:30pm
Melbourne
event image

Managing Industrial Networks with Cisco Networking Technologies

The goal of this course is to enable you to achieve competency and skills to install, maintain, and troubleshoot industrial network systems while helping to ensure network availability, reliability, and Internet security throughout your company.

Course Code: IMINS

Register Now
18 June 2018 - 22 June 2018 8:30am - 4:30pm
Melbourne
event image

Level 4: Programming Logix5000 Motion Applications

This course is intended to provide plant personnel with the skills to configure and program Logix5000 applications specifically for integrated motion control functionality using ladder logic. Students will learn how to apply the Logix5000 architecture to a multi-axis motion control system.

Course Code: CCN142

Register Now
19 June 2018 - 22 June 2018 8:30am - 4:30pm
Melbourne
event image

SLC 500 and RSLogix 500 Maintenance and Troubleshooting

This skill-building course provides you with the knowledge and practice needed to interpret, isolate, and diagnose common hardware problems related to noise, power, and discrete and analogue I/O.

Course Code: CCPS43

Register Now
19 June 2018 - 22 June 2018 8:30am - 4:30pm
Perth
event image

FactoryTalk View SE Programming

Upon completion of this course, you should be able to organize and develop FactoryTalk View Site Edition (SE) applications.

Course Code: CCV207

Register Now
19 June 2018 - 22 June 2018 8:30am - 4:30pm
Melbourne
event image

Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals & Troubleshooting

This course is intended for individuals who need to maintain and troubleshoot a ControlLogix system, but have no current working experience with ControlLogix systems.

Course Code: CCP299

Register Now
19 June 2018 - 22 June 2018 8:30am - 4:30pm
Sydney
event image

EtherNet/IP Fundamentals and Troubleshooting

With this course, you will learn how to use various tools to assign IP addresses, such as BOOTP-DHCP Server software, RSLinx Classic software, and rotary switches.

Course Code: CCP180

Register Now
19 June 2018 8:30am - 4:30pm
Newcastle
event image

EtherNet/IP Configuration and Troubleshooting

This course should prepare you to effectively:
• Configure a Stratix® switch (5700, 8000, and/or 8300) to meet a variety of network requirements
• Assign IP addresses to devices on an EtherNet/IP network using rotary switches and a variety of software
• Monitor switch performance and status
• Diagnose and resolve issues with switches and devices on a network

Course Code: CCP183

Register Now
20 June 2018 - 22 June 2018 8:30am - 4:30pm
Newcastle
event image

Managing Industrial Networks for Manufacturing with Cisco Technologies

The goal of this course is to enable you to achieve competency and skills to configure, maintain, and troubleshoot industry standard network protocols as well as wireless and security technologies. Learn how to make full use of current infrastructures while developing a converged platform for flexibility to support future business outcomes.

Course Code: IMINS2

Register Now
25 June 2018 - 29 June 2018 8:30am - 4:30pm
Sydney
event image

FactoryTalk View ME and PanelView Plus Programming

This course is a skill-building course that provides you with the skills necessary to develop FactoryTalk View Machine Edition (ME) applications that run on the next-generation PanelView Plus terminals.

Course Code: CCV204

Register Now
26 June 2018 - 29 June 2018 8:30am - 4:30pm
Sydney
event image

PlantPAx System Design and Configuration

This course introduces the core components of a PlantPAx distributed control system, including system architecture, configuration, alarms, and security. System Integrators who have a background in automated process control and Rockwell Automation products should attend this course.

Course Code: PRS019

Register Now
26 June 2018 - 29 June 2018 8:30am - 4:30pm
Perth
event image

Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals & Troubleshooting

This course is intended for individuals who need to maintain and troubleshoot a ControlLogix system, but have no current working experience with ControlLogix systems.

Course Code: CCP299

Register Now
26 June 2018 - 29 June 2018 8:30am - 4:30pm
Mt Isa
event image

TUV Functional Safety Technician

In this training, students will learn how the current standards dictate the selection, assembly, installation, validation, and maintenance of safety devices and components to reduce hazards from machinery and ensure the safety of people and the environment. Practical examples will demonstrate possibilities regarding machine protection.

Course Code: SAF-TUV0T

Register Now
26 June 2018 - 27 June 2018 8:30am - 4:30pm
Gladstone
event image

Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals & Troubleshooting

This course is intended for individuals who need to maintain and troubleshoot a ControlLogix system, but have no current working experience with ControlLogix systems.

Course Code: CCP299

Register Now
26 June 2018 - 29 June 2018 8:30am - 4:30pm
Albury

Get In Touch With Nhp

Please fill in the enquiry form and we will get back to you as soon as possible.

If your enquiry is of an urgent nature, please call our hotline on:

AUS - 1300 NHP NHP (1300 647 647)
NZ - 0800 NHP NHP (0800 647 647)

Thank You

Your details have been submitted. We will get back to you as soon as possible.

Check out some of our latest videos below: