STAHL control equipment forms a very broad range of products suitable for hazardous areas. Custom-made solutions can be offered in the following protection techniques:
Control devices can be fitted to customer orders in our HAE workshop.
|
8040 Series
Zone 1 & 21 (DIP / Ex tD) Control Stations
- Suitable for Zones 1 & 2, 21 & 22
- Enclosures in - Fibreglass Reinforced
Polyestor resin
- 3 sizes available
- Push button units, control and isolator switching, indicators, ammeters
- Degree of protection IP 65 - 66
- Wide range of control devices creates a
control system that has broad applications
|
|
|
8146 Series
Zone 1 & 21 (DIP / Ex tD) Control Station Enclosure in GRP
- Suitable for Zones 1 & 2, 21 & 22
- 10 sizes available
- Terminals & entries fitted to order
|
|
|
8125 Series
Zone 1 & 21 (DIP / Ex tD) Control Station Enclosure in Stainless Steel
- Suitable for Zones 1 & 2, 21 & 22
- Housing in - 316 Stainless steel
- 6 enclosure sizes 91 mm and 150 mm
depths
- Varied systems can be assembled to suit control applications
- Degree of protection IP 65 - 66
|
|
|
8537 Series
Zone 1 & 21 (DIP / Ex tD) Switches
- Suitable for Zones 1 & 2, 21 & 22.
- Enclosures in - Fibreglass Reinforced Polyestor resin.
- 3 and 6 pole switches
- 12 A / 16 A, 25 A, 40 A, 63 A / 80 A, 125 A / 160 A, 250 A, 315 A, 400 A, 500 A.
- Definite opening for main contacts.
|
|
|
8146 Series Load and Motor Switches
Zone 1 Ex de Load and Motor Switches
- Suitable for Zones 1 & 2, 21 & 22.
- Motor switching capacity AC 3 to DIN VDE 0660 / IEC / EN 60 947
- Isolating switches characteristics
- Available for rated operating currents of 16 A to 125 A
- Enclosures in - Fibreglass Reinforced Polyester resin
- Large grip, 3 way pad-lockable
- Degree of protection IP 65
|
|
|
8265 Motor Starter
Ex de Motor Starters
-
Explosion protection to IEC Ex
- Suitable for Zones 1 & 2, 21 & 22
- Standard DOL motor starters 4 - 15 kW
- Sprecher + Schuh contactors and overloads
- Wago Ex e rated, vibration protected, terminals
|
|
|
8264 / 5 (CUBEX) Ex d Control Panel
Zone 1, 21 & 22 Control Devices for Panel Mounting
- Suitable for Zones 1 & 2, 21 & 22.
- Enclosures in - Marine grade aluminium.
- Ex d distribution panels
- Customer specific solutions can be
designed for use within CUBEx.
- CUBEx enclosures can be used with
8146 and 8125 Ex e enclosures to
create systems.
|
|
|
8003 / 8013 / 8018 Series
Zone 1, 21 & 22 Control Devices for Panel Mounting
- Suitable for Zones 1 & 2, 21 & 22.
- These are complete explosion protected
devices designed for panel mounting.
- From push button to control switch
devices.
|
|
|
8146 / 5075 Ground Systems Series
Zone 1 Ex d Grounded Monitoring Devices
- Suitable for Zones 1 & 2, 21 & 22.
- Monitored grounding of tank container
and drums during the loading of flammable
liquids
|
|
|
8146 / 5052 Series Fire Alarm
Zone 1 Ex de Fire Alarm Station
- Suitable for Zones 1 & 2, 21 & 22.
- Enclosures in - Fibreglass Reinforced
Polyester resin.
- Colour Red (RAL 3000)
- Break glass to operate
|
|
|
STAHLLimit Switches
Zone 1, 21 & 22 Limit Switches
- Large range consisting of STAHL
- Suitable for Zones 1 & 2, 21 & 22.
- Broad range of switch control solutions.
- extended plunger.
- roller lever plunger.
- roller lever.
- adjustable roller lever plunger.
- angled roller lever plunger.
- actuating rod.
|
|
|
Steute Pull-Wire Switches
- Ex protection: Ex d. 11c. T6.
- Actuation by pull of a wire (range 10m up to 50m).
- Switching capacity: 6A/400V, AC15.
- Temperature range -25°C to +70°C.
|
|
|
EEx/EExM 14 range
- Thermoplastic enclosure
- Double-insulated
- Ex II 2G EEx d IIC T6
Ex II 2D IP65 T80°C
- Slow action, change-over contact, double break
- Snap action, change-over contact, single or double break
- Available with overlapping contacts
- Mountings to EN 50047
- Suitable for in-line mounting
- Pre-wired cable 1m long
- IP67
|
|
|
EEx 13 range
- Thermoplastic enclosure
- Ex II 2G EEx d IIC T6
Ex II 2D IP65 T80°C
- Double-insulted
- Slow action, 1NO an 1NC contact, double break
- Available with overlapping contacts
- Suitable for in-line mounting
- Pre-wired cable 1m long
- IP67
|
|
|
EEx 335 range
- Metal enclosure
- Ex II 2G EEx de IIC T6
Ex II 2D IP65 T80°C
- To EN 50041
- Slow action available with overlapping contacts
- Wiring compartment
- Wide range of alternative actuators
- Actuator heads can be repositioned in steps 4 x 90°
- Angle of roller lever adjustable In 10° steps
|
|
|
EEx T 356 range
- Thermoplastic enclosure with metal cover
- Double-insulated
- Ex II 2G EEx de IIC T6
Ex II 2D IP65 T80°C
- Mounting dimensions and Switching points to EN 50041
|
|
|
EEx GFS, one pedal
- Max. 2 contacts
- Metal enclosure
- Ex II 2G EEx d IIC T6
Ex II 2D IP65 T80°C
- With or without protective shield
- Wide opening in shield
- Low pedal height
- Pre-wired cable 3 m long
- Available with special finish in RAL colour tones
|
|
|
EEx GFS, two pedals
- Max. 2 contacts per pedal
- Metal enclosure
- Ex II 2G EEx d IIC T6
Ex II 2D IP65 T80°C
- With or without protective shield
- Pre-wired cable 3 m long
- Available with special finish in RAL colour tone
|
|
|
EEx GFS, three pedals
- Max. 2 contacts per pedal
- Metal enclosure
- Ex II 2G EEx d IIC T6
Ex II 2D IP65 T80°C
- With or without protective shield
- Pre-wired cable 3 m long
- Available with special finish in RAL colour tones
|
|
|
EEx GFSI, one pedal
- Max. 2 contacts
- Metal enclosure
- Ex II 2G EEx d IIC T6
Ex II 2D IP65 T80°C
- With or without protective shield
- Wide opening in shield
- Ergonomic pedal shape
- Pre-wired cable 3 m long
- Available with special finish in RAL colour tones
|
|
|
EEx 335 4VSR
- Metal enclosure
- 2 contacts
- Ex II 2G EEx de IIC T6
Ex II 2D IP65 T80°C
- Mounting details to EN 50041
- Adjustable-length rod lever with nylon roller
- 1 cable entry
- IP65
- For light to medium duty
- Patented low-wear actuator head
|
|
|
EEx 73 SR
- Metal enclosure
- 2 contacts
- Ex II 2G EEx d IIC T6
Ex II 2D IP65 T80°C
- Reset by push button or key possible
|
|
|
EEx 75 SR
- Metal enclosure
- 2 or 4 contacts
- Ex II 2G EEx d IIC T6
Ex II 2D IP65 T80°C
- Reset by push button or key possible
|
|
|
EEx RC M20
- Nickel-plated brass enclosure
- Ex II 2G EEx m II T6
Ex II 2D IP67 T80°C
- Long life
- Proximity switch
- 1 reed contact
- Particularly resistant to vibration
- Available for actuation from front, from side only with bistable type
- Any direction of operation possible
- Actuating distance up to 30 mm depending on actuating magnet
- Pre-wired cable
- IP67
- Stainless steel type available
|
|
