* Pricing and stock availability is subject to change. If stock is unavailable, appropriate lead times may apply.
KTS 011: Thermostat (normally open); contact maker for regulating filter fans and heat exchangers or for switching signal devises when temperature limit has been exceeded.
When you have selected the correct heating and cooling products for your enclosure the appropriate temperature and humidity controls are recommended.
KTO, KTS, FZK and ZR thermostats are recommended for use with all heating and ventilation products to maintain your desired temperature inside your enclosure. Thermostats will also extend the life span of ventilation products and reduce the need to clean/change filters.
MFR Hygrostats are designed to control enclosure heaters so that the dew point is raised when a critical relative humidity of 65% is exceeded. In this way condensation and corrosion is effectively prevented.
These products provide an effective and efficient control for our heating and cooling products by maintaining the desired temperature and to guarantee the climatic conditions needed for trouble-free operation of electronic and electrical components.
Stego thermostats and hygrostats are also a great way to monitor your enclosures if over temperature alarms are required to notify you of faults.
- Contact Rating - 1 N/C 10 A 250 V AC
- Temperature Range - 0 to + 60° C
- Application - Cooling
- Dimensions (H x W x D) - 60mm x 33mm x 43mm
Comments
9DKkxZ , [url=http://ndazcqisszej.com/]ndazcqisszej[/url], [link=http://nkdtvndzwuvg.com/]nkdtvndzwuvg[/link], http://ryxwmqaxtbhy.com/
Heat Pump. I wentad one that will run off of the system power but Honeywell is telling me to get one that is battery powered. HVAC people want $200+ to come install one for me.